LED Autolamp GVM Upgrade lights 200 Series

When performing a GVM upgrade the vehicle may move into the NB1 Catagory requiring an upgrade (or additional) Side indicators.

These lights must face backwards.


To install measure up 450mm from the edge of the plastic mudflap, and 100mm from the door edge. Drill a 12mm hole and pass the wire through. Install the loom to the light at the rear, then remove the factory plug, and install this male/female patch lead. Refit and your lights will be working like a charm.


Fitted with 3M adhesive these lights not only look factory, but will last too.


These lights are sold as a pair (one for the left and one for the right).

Sign up for our Newsletter